Ulano 25 Screen Mesh Prep for Screen Printing

A ready-to-use liquid mordant that promotes mesh water retention and thus the uniform adhesion of all Direct Films. All Mesh Prep is especially helpful for use with thin CDF® Direct Films applied to fine mesh, which inherently holds little water. All Mesh Prep No. 25 rinses easily from the screen with hot or cold water. Non-caustic – will not harm frames, mesh, or adhesives on stretch and glue frames. Recommended for use with all CDF® Direct Films. Do not use on natural silk. Instructions Apply All Mesh Prep No. 25 only after the mesh has been thoroughly degreased and immediately before adhering the Direct Film. Rinse both sides of the screen thoroughly with water. Apply All Mesh Prep No. 25 with a medium-stiff, long bristle nylon brush to both sides of the screen. Let the screen stand for one or two minutes. Rinse the screen thoroughly from both sides with hot or cold water. All Mesh Prep No. 25 should be used no more than one hour before adhering the film. If you do not proceed immediately to adhere the Direct Film, re-wet the screen just before adhering the film. Economical, Strong Formulation, Non-Caustic, Won’t Harm Mesh, Recommended For Use with Direct Films