Voltage: AC 120V
Dimension: 22.6″(L) x 14.1″(H) x 10.5″(W)
1. 2 heat settings: Low/ High
2. 5 level flame brightness
3. Overheat protection
4. Flame with/ without heat optional
5. 24 hours on/ off timer
6. Remote control
“Heater” Button Operation:
-1st press, it starts 1500W-power heating work
-2nd press, it runs in 750W power
-3rd press, it automatically stop working after 60s heat dissipating
Maintance & Storage:
1. Turn off power switch
2. Unplug the unit and cool it completely
3. To keep it clean, out shell may be cleaned with soft, damp cloth. Mild detergent is needed if possible
4. Do not use alcohol, gasoline, abrasive powders, furniture polish or rough brushes to clean
5. Do not immerse the heater in water
6. Use it until it’s completely dry
7. Do not place the heater on rugs or other flammables
8. Do not be covered by clothes or anything else
For a warm and comfortable environment, place the LED heater into an existing fireplace or on the floor and enjoy the realistic red-burning logs and dancing flame light effect.
The air heater will fan warm air around the room in a large range without smoke, burning or dry-out air.
The pulsating and vivid flame effect can be turned on separately from the heat, so you can enjoy the ambience of a rolling fire during any season.
Safely equipped with automatic overheat shut-off, cuts power in case of overheating, let you sleep warmly and quietly at night without worry.
Comes with remote control to easily turn on/off or adjust power, heat or flame with an optional timer setting in case you leave the room.
|Assembled Product Dimensions (L x W x H)|
22.60 x 10.50 x 14.10 Inches