Iuhan Path Maker Mold Reusable Concrete Cement Stone Design Paver Walk Mould

Path Maker Mold Reusable Concrete Cement StoneDesign Paver Walk Mould
Feature：
DIYplastic molded paving mold is spread in Europe and America, is apersonalized brick mold
Laying out the effect posted up like blocks of stones
Sothe path is more exotic, to create a style of their own garden path.
Material:PP Resin
Color:Black
Size：36×36cm
How touse this Concrete Paver Mold to build the pathways:
Step 1:
Mix cement with water, according to package directions. When ready to use,the concrete will be the consistency of oatmeal and thick enough to hold anedge when you slice into it with a shovel.
Step 2:
Fill the paver mold, scooping the concrete in with a shovel and making sureto fill each area.
Step 3:
Using rubber gloves, spread the concrete around the mold, filling in anygaps or low points. Tap the mold with your hand to eliminate any airbubbles.
Step 4:
Following the contours of the mold, smooth out the concrete, wiping away anyexcess.
Step 5:
Allow the concrete to set for a maximum of five minutes, then carefullyremove the mold. For the next stretch, rotate the mold a quarter-turn andplace it beside the paver just completed, angling slightly if you’recreating a curving pathway.
Step 6:
After letting the concrete cure overnight, fill the cracks with dirt andwash away any excess. Wet the ground around the newly formed pavers to helpthem settle
PackageIncluded:
1 xConcrete Slabs Path Walk Maker Mould
Iuhan Path Maker Mold Reusable Concrete Cement Stone Design Paver Walk Mould